Horizontal Centrifugal Pumps - H20 Series
MBH pumps, back-pull-out design Pumps enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of H20 Series End suction pump is covered by three driving units thereby reducing inventory and achieving interchangeability of parts. These water pumps are either gland packed or mechanically sealed.
- Overview
Product Features
- The casing has axial suction and top centre line delivery with self venting design
- The impellers are statically and dynamically balanced
- Shaft is fully protected from the liquid being handled
- The stuffing box is sealed by either gland packing or by mechanical seal (DIN/Cartridge)
- Pre-lubricated grease sealed bearings are used as a standard scope of supply
- Clockwise when viewed from driving end
- Pumps can be driven by electric motor or engine
Applications
Water supply
Sprinkler
Air conditioning
Industrial water
Swimming pool water
Hot water (Up to 90 C)
Fire fighting
Drinking water/Potable water
Cooling water
Condensate
Cooling water
Alcohol in distillery
- Specifiactaions
Product specifications
Delivery Size
32 to 200 mm
Flow
Up to 700 m3/hr
Head
Up to 100 meters
Speed / RPM
Speed from 1450 & 2900 rpm, 1760 & 3500 rpm, 50 & 60 Hz
Frequency
50 hz / 60 hz
Working Pressure
16 kg/cm2 (MAWP)
Temperature
up to 40 C
Sealing
Gland Packed (Standard), Mechanical Seal (Against Order)
Lubrication
Grease (Standard) & Oil (Against Order)
Product material
Pump Casing / Casing Cover
Cast Iron / CF8 / CF8M / Cast steel
Impeller
Cast Iron / Bronze / CF8M/ CF8 / Cast Steel
Wear Rings
Cast Iron / Bronze
Pump Shaft
CS 45C8 / St. Steel ASTMA-276 TYPE 410
Shaft Sleeve
ASTM A 276 Type 410 H
Motor Housing
- Documents